Ara
Toplam kayıt 8, listelenen: 1-8
The infuence of cement kiln dust on strength and durability properties of cement‑based systems
(SPRINGER HEIDELBERG, 2022)
There are very few studies in the literature on the usage of CKD in cementitious systems. This article presents the laboratory
study results on the infuence of cement kiln dust (CKD) on the properties of mortar made with ...
Fresh, Mechanical, Transport, and Durability Properties of Self-Consolidating Rubberized Concrete
(AMER CONCRETE INST, 2012)
This paper presents the fresh, mechanical, transport, and durability performances of self-consolidating rubberized concretes (SCRCs). Fresh concrete properties were determined with slump flow, V-funnel, J-ring, and L-box ...
Investigation of Properties of Engineered Cementitious Composites Incorporating High Volumes of Fly Ash and Metakaolin
(AMER CONCRETE INST, 2012)
This study was carried out to develop engineered cementitious composites (ECCs) incorporating binary blends of high volumes of fly ash (FA) and metakaolin (MK) for the purpose of achieving low drying shrinkage and high ...
Influence of admixtures on the properties of alkali-activated slag mortars subjected to different curing conditions
(ELSEVIER SCI LTD, 2013)
This paper presents the influence of shrinkage-reducing (SHR) and superplasticizing and set-retarding
admixtures (SSRe) on the properties of slag pastes and mortars activated by liquid sodium silicate with
different ...
Dual effectiveness of freezing-thawing and sulfate attack on high-volume slag-incorporated ECC
(ELSEVIER SCI LTD, 2013)
This study investigated the dual effect of freeze–thaw cycles with sodium sulfate solution on the performance of non-air-entrained Engineering Cementitious Composites (ECCs) with high volumes of slag. ECC
specimens ...
Reaction kinetics and properties of pumice-based geopolymer systems cured at room temperature
(ELSEVIER, 2023)
This research investigated the kinetics of pumice-based geopolymer systems and their physical and mechanical
properties. The effect of the Na2SiO3/NaOH ratio of geopolymer systems on the rate of heat evolution and total
heat ...
Influence of nano SiO2 and nano CaCO3 particles on strength, workability, and microstructural properties of fly ash-based geopolymer
(ERNST & SOHN, ROTHERSTRASSE 21, BERLIN, DEUTSCHLAND 10245, GERMANY, 2020)
The influence of nano SiO2(NS) and CaCO3(NC) particles on the properties of class F fly ash based geopolymer mortar activated with different sodium ion concentrations have been investigated. Mortar mixture proportions were ...
A new parameter influencing the reaction kinetics and properties of fly ash based geopolymers: A pre-rest period before heat curing
(ELSEVIERRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2021)
In this study, the influence of a pre-rest period before heat curing (as a new parameter), on the physical properties, flexural and compressive strength, and microstructure of geopolymer mortars and pastes produced with ...