Erişim şekli için "info:eu-repo/semantics/closedAccess" Makine Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 63, listelenen: 21-40
-
Finite Element Analysis of the Stress Distribution Associated With Different Implant Designs for Different Bone Densities
(WILEY, 2022)Purpose: The main objective of this study was to investigate the influence of implant design, bone type, and abutment angulation on stress distribution around dental implants. Materials and methods: Two implant designs ... -
Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading
(ELSEVIER SCIENCE SAPO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2021)This paper focuses on the mechanical properties and fracture behavior of newly developed body-centered-cubic structured TiTaHfNb, TiTaHfNbZr and TiTaHfMoZr high entropy alloys (HEAs) under impact loading as part of an ... -
High-concentration carbon assists plasticity-driven hydrogen embrittlement in a Fe-high Mn steel with a relatively high stacking fault energy
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2018)We investigated the effects of electrochemical hydrogen charging on the mechanical properties of a Fe-33Mn-1.1C austenitic steel with high carbon concentration and relatively high stacking fault energy. Hydrogen pre charging ... -
Human-oriented approaches for assistive and rehabilitation robotics - Engineering methods, technical implementation, and treatment
(ELSEVIERRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2017)Human-oriented approaches for assistive and rehabilitation robotics - Engineering methods, technical implementation, and treatment -
Hybrid Power System for Mobile Robotics
(IEEE345 E 47TH ST, NEW YORK, NY 10017 USA, 2016)The power source is a design characteristic for a mobile robot in which the energy source used must provide enough power for a desired period of time depending on the specific task of a robot. Batteries are the most common ... -
Image processing methodology for patient-specific instrument design
(WILEY, 111 RIVER ST, HOBOKEN 07030-5774, NJ USA, 2020)Background Patient-specific instrumentation (PSI) improves accuracy of surgical operations. PSI needs software for preoperative planning and instrument design. In this study, we explain the methodology of developing a ... -
INTERNAL FLOW PHYSICS OF A FLUIDIC OSCILLATOR SPRAY IN THE TRANSITION REGIME
(BEGELL HOUSE INC50 NORTH ST, DANBURY, CT 06810, 2016)An experimental investigation of the underlying flow physics of a dual-jet interaction fluidic oscillator spray has been conducted in the transition regime for a Reynolds number of 1680. The transition regime is defined ... -
Internal jet interactions in a fluidic oscillator at low flow rate
(SPRINGER, 2014)This study focuses on the internal jet interactions and the oscillation mechanism of the feedback-free fluidic oscillator at low flow rate, corresponding to a Reynolds number of 1,350 (based on exit nozzle width and average ... -
Investigating the best automatic programming method in predicting the aerodynamic characteristics of wind turbine blade
(PERGAMON-ELSEVIER SCIENCE LTD, 2023)Automatic programming (AP) is a subfield of artificial intelligence (AI) that can automatically generate computer programs and solve complex engineering problems. This paper presents the accuracy of four different AP methods ... -
Investigation of the effect of hidden vortex generator-flap integrated mechanism revealed in low velocities on wind turbine blade flow
(PERGAMON-ELSEVIER SCIENCE, 2023)In this study, the flap and vortex generator (VG) mechanisms which were employed separately in aircraft were used as integrated first in literature. In this mechanism, the flap motion triggered and activated the VGs when ... -
Investigations of strain rate, size, and crack length effects on the mechanical response of polycaprolactone electrospun membranes
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)The effects of strain rate, size (height x width), and pre-existing crack length on the mechanical response of polycaprolactone electrospun membranes were investigated by tension tests conducted at room temperature. In ... -
Loading-rate effect on tensile and bending strength of 3D-printed polylactic acid adhesively bonded joints
(TAYLOR & FRANCIS LTD2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2021)Additive manufacturing provides the production of many machine parts and components with complex geometries. The adhesive bonding technique can be alternative method for joining parts produced with additive manufacturing. ... -
Long-term supplier selection problem: A case study
(SCIENCEPARK SCI, ORGANIZATION & COUNSELING LTD13 SUBAT ST, NO 17, KYRENIA, 99030, CYPRUS, 2017)The problem to select a supplier has taken the best supplier according to all combinations of sorting criteria. With regard to the supplier selection problem, the priority ranking of the criteria taken into consideration ... -
Low velocity oblique impact behavior of adhesively bonded single lap joints
(TAYLOR & FRANCIS LTD, 2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2019)This article addresses the low velocity oblique impact behavior of adhesively bonded single lap joints, and the effects of adherend strength and plastic ductility, impact energy, overlap length and oblique impact angle on ... -
Low-speed bending impact behaviour of adhesively bonded dissimilar single-lap joints
(TAYLOR & FRANCIS LTD2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2021)This study investigates the low-speed bending impact behaviour of adhesively bonded dissimilar single-lap joints and the effects of both strength and plastic deformation capability of adherend material on adhesive failure. ... -
Low-Speed Oblique Impact Response of Adhesively Bonded Dissimilar Single-Lap Joints
(ASCE-AMER SOC CIVIL ENGINEERS, 2022)Adhesively bonded joints are widely preferred for joining similar and dissimilar materials due to the mechanical advantages they provide. As the demand for the adhesively bonded method increases, it is necessary to determine ... -
Lowering Strain Rate Simultaneously Enhances Carbon- and Hydrogen-Induced Mechanical Degradation in an Fe-33Mn-1.1C Steel
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2019)We investigated the strain rate dependency of the hydrogen-induced mechanical degradation of Fe-33Mn-1.1C steel at 303K within the strain rate range of 10(-2) to 10(-5)s(-1). In the presence of hydrogen, lowering the strain ... -
Magnus series expansion method for solving nonhomogeneous stiff systems of ordinary differential equations
(ACADEMIC PUBLICATION COUNCILPO BOX 17225, KHALDIYA 72453, KUWAIT, 2016)In this paper, Magnus Series Expansion Method, which is based on Lie Groups and Lie algebras is proposed with different orders to solve nonhomogeneous stiff systems of ordinary differential equations. Using multivariate ... -
Micro level two dimensional stress and thermal analysis anode/electrolyte interface of a solid oxide fuel cell
(PERGAMON-ELSEVIER SCIENCE LTD, 2015)The delamination and degradation of solid oxide fuel cells (SOFCs) electrode/electrolyte interface is estimated by calculating the stresses generated within the different layers of the cell. The stresses developed in a ... -
Micro-/Nanostructured Highly Crystalline Organic Semiconductor Films for Surface-Enhanced Raman Spectroscopy Applications
(WILEY-V C H VERLAG GMBH, 2015)The utilization of inorganic semiconductors for surface-enhanced Raman spectroscopy (SERS) has attracted enormous interest. However, despite the technological relevance of organic semiconductors for enabling inexpensive, ...