Kategori "Makale - Uluslararası - Editör Denetimli Dergi" Makine Mühendisliği Bölümü Koleksiyonu İçin Listeleme
Toplam kayıt 44, listelenen: 1-20
-
Characterization of 3D fabric permeability with skew terms
(ELSEVIER SCI LTDTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND, 2017)Flow simulations can predict resin flow behavior and void formation locations in a preform. One important parameter for simulation is the preform permeability. For thick parts with distribution media on the surface, resin ... -
Corrosion behavior of novel Titanium-based high entropy alloys designed for medical implants
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2020)This paper reports on the corrosion behavior of three TiTaHf-based high entropy alloys (HEAs) in simulated body fluid (SBF) and artificial saliva (AS) in order to assess their potential utility as implant materials. ... -
A detailed investigation of the effect of hydrogen on the mechanical response and microstructure of Al 7075 alloy under medium strain rate impact loading
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)Effects of hydrogen and temperature on impact response and corresponding microstructure of aluminum (Al) 7075 alloy were investigated under medium strain rate impact loading. The specimens were subjected to impact energy ... -
Development of an optical measurement system for surface depth measurements and study of focus effect on determination of steel inclusion content by EN-10247
(SPIE-SOC PHOTO-OPTICAL INSTRUMENTATION ENGINEERS1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98225, 2021)Surface inspections are important in steelmaking processes to characterize the final product's quality. We present a method to measure surface depth profile using laser scattering geometry. This technique is used to analyze ... -
Effect of hydrogen on fracture locus of Fe-16Mn-0.6C-2.15Al TWIP steel
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)Effect of hydrogen on the mechanical response and fracture locus of commercial TWIP steel was investigated comprehensively by tensile testing TWIP steel samples at room temperature and quasi-static regime. 5 different ... -
Effect of pre-rolling temperature on the interfacial properties and formability of steel-steel bilayer sheet in Single Point Incremental Forming
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)The aim of this research was to investigate the effect of pre-rolling temperature on the interfacial properties in delamination modes 1 and 2; and formability in Single Point Incremental Forming (SPIF) of Steel-Steel (St-St) ... -
The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites
(SPRINGER INDIA, 7TH FLOOR, VIJAYA BUILDING, 17, BARAKHAMBA ROAD, NEW DELHI, 110 001, INDIA, 2020)The aim of this study is to produce composite materials by recycling metallic chips, which are found in industry as a large amount of waste. In addition, it is aimed to investigate the effect of ultrasonic cleaning process ... -
Effects of total cost of ownership on automobile purchasing decisions
(TAYLOR & FRANCIS LTD, 2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2020)In this paper, we reveal a complete picture of ownership-related expenses and construct a decision model which helps decision maker to make the best choice when purchasing an automobile. The decision model helps the customers ... -
Experimental and Molecular Dynamics Simulation-Based Investigations on Hydrogen Embrittlement Behavior of Chromium Electroplated 4340 Steel
(ASMETWO PARK AVE, NEW YORK, NY 10016-5990, 2021)In this study, chromium electroplating process, corresponding hydrogen embrittlement, and the effects of baking on hydrogen diffusion are investigated. Three types of materials in the form of Raw 4340 steel, Chromium ... -
An experimental and numerical study of the exchange current density in an HTPEM fuel cell
(WILEY-V C H VERLAG GMBHPOSTFACH 101161, 69451 WEINHEIM, GERMANY, 2021)The purpose of this study is to examine the effects of exchange current density, as dependent on operating parameters, on the activation polarization in an HTPEM fuel cell. In line with this purpose, cell performance tests ... -
Experimental investigation on chloroprene and acrylonitrile butadiene rubber types reinforced with nano-materials
(IOP PUBLISHING LTD, TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND, 2019)In this research, the effects of three different nano-materials (Nano-Carbon Black, Nano-ZnO, and Multi-Walled Carbon Nanotubes (MWNTs)) on two different rubber types (Chloroprene Rubber (CR), and Acrylonitrile Butadiene ... -
Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading
(ELSEVIER SCIENCE SAPO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2021)This paper focuses on the mechanical properties and fracture behavior of newly developed body-centered-cubic structured TiTaHfNb, TiTaHfNbZr and TiTaHfMoZr high entropy alloys (HEAs) under impact loading as part of an ... -
High-concentration carbon assists plasticity-driven hydrogen embrittlement in a Fe-high Mn steel with a relatively high stacking fault energy
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2018)We investigated the effects of electrochemical hydrogen charging on the mechanical properties of a Fe-33Mn-1.1C austenitic steel with high carbon concentration and relatively high stacking fault energy. Hydrogen pre charging ... -
Identification of non-proportional structural damping using experimental modal analysis data
(JVE INT LTD, GELIU RATAS 15 A, KAUNAS, LT-50282, LITHUANIA, 2020)A verified computational model of a complex structure is crucial for reliable vibro-acoustic simulations. Mass and stiffness matrices of such a computational model may be constructed correctly, provided all the design ... -
Image processing methodology for patient-specific instrument design
(WILEY, 111 RIVER ST, HOBOKEN 07030-5774, NJ USA, 2020)Background Patient-specific instrumentation (PSI) improves accuracy of surgical operations. PSI needs software for preoperative planning and instrument design. In this study, we explain the methodology of developing a ... -
In vitro contact guidance of glioblastoma cells on metallic biomaterials
(SPRINGERVAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS, 2021)Cancer cells' ability to sense their microenvironment and interpret these signals for the regulation of directional adhesion plays crucial role in cancer invasion. Furthermore, given the established influence of mechanical ... -
INTERNAL FLOW PHYSICS OF A FLUIDIC OSCILLATOR SPRAY IN THE TRANSITION REGIME
(BEGELL HOUSE INC50 NORTH ST, DANBURY, CT 06810, 2016)An experimental investigation of the underlying flow physics of a dual-jet interaction fluidic oscillator spray has been conducted in the transition regime for a Reynolds number of 1680. The transition regime is defined ... -
Interpolated variational iteration method for solving the jamming transition problem
(ELSEVIER, RADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2019)The purpose of this study is to present an analytical based numerical solution for Jamming Transition Problem (JTP) using Interpolated Variational Iteration Method (IVIM). The method eliminates the difficulties on analytical ... -
Investigation of the effect of surface crack on low-velocity impact response in hybrid laminated composite plates
(SPRINGER HEIDELBERG, TIERGARTENSTRASSE 17, D-69121 HEIDELBERG, GERMANY, 2020)Composite materials can be damaged in the environments in which they are used, due to the loads they are exposed to or due to different effects on the production processes. The formation processes of these damages generally ... -
Investigations of strain rate, size, and crack length effects on the mechanical response of polycaprolactone electrospun membranes
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)The effects of strain rate, size (height x width), and pre-existing crack length on the mechanical response of polycaprolactone electrospun membranes were investigated by tension tests conducted at room temperature. In ...