Başlık için Mühendislik Fakültesi listeleme
Toplam kayıt 1251, listelenen: 460-479
-
FFRP: Dynamic Firefly Mating Optimization Inspired Energy Efficient Routing Protocol for Internet of Underwater Wireless Sensor Networks
(IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 445 HOES LANE, PISCATAWAY, NJ 08855-4141 USA, 2020)Energy-efficient and reliable data gathering using highly stable links in underwater wireless sensor networks (UWSNs) is challenging because of time and location-dependent communication characteristics of the acoustic ... -
Field Test and Fading Measurement of a Distributed Acoustic Sensor System over a 50 km-long Fiber
(SPIE-INT SOC OPTICAL ENGINEERING, 1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA, 2018)In this study, we present a direct detection distributed acoustic sensor based on phase-sensitive optical time domain reflectometer (phi-OTDR) with long sensing range and high signal-to-noise ratio (SNR), which is field-tested ... -
Filtration and Optimization for the Recovery of Powder Soap Used in Wire Drawing Process
(Afyon Kocatepe Üniversitesi, 2024)Today, the amount of production and production-related waste has increased in order to meet the rapidly increasing consumption. Recycling processes have become inevitable in order to dispose of the resulting wastes without ... -
Finding Glenoid Surface on Scapula in 3D Medical Images for Shoulder Joint Implant Operation Planning-3D OCR
(SPIE-INT SOC OPTICAL ENGINEERING1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA, 2017)Medical imaging has great importance in earlier detection, better treatment and follow-up of diseases. 3D Medical image analysis with CT Scan and MRI images has also been used to aid surgeries by enabling patient specific ... -
Finite Element Analysis of Low-Speed Oblique Impact Behavior of Adhesively Bonded Composite Single-Lap Joints
(SPRINGER, 2023)The development of a realistic numerical model that predicts the impact behavior of adhesively bonded composite joints is important for many industrial sectors such as automotive, aerospace, and marine. In this study, it ... -
Finite Element Analysis of the Stress Distribution Associated With Different Implant Designs for Different Bone Densities
(WILEY, 2022)Purpose: The main objective of this study was to investigate the influence of implant design, bone type, and abutment angulation on stress distribution around dental implants. Materials and methods: Two implant designs ... -
A first principles study of amorphous and crystalline silicon tetraboride
(ELSEVIER SCIENCE SAPO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2021)Using first principles simulations, we generate an amorphous silicon tetraboride (SiB4) network from the melt and compare it structurally, mechanically and electrically with the crystal. Surprisingly the amorphous form is ... -
Flexible and Ecofriendly Keypad Based on Paper and Pencil
(IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 2023)Pencil-on-paper electronics has gained growing interests as cost-effective, ecofriendly, flexible, and light-weight devices for various applications. In this letter, a flexible keypad employing pencil-on-paper capacitive ... -
Flexible electrodes composed of flower-like MoS2 and MXene for supercapacitor applications
(ELSEVIER, 2024)Flexible supercapacitors with high charge storage ability are needed for emerging applications in wearable electronics. Here, we introduce a novel flexible supercapacitor electrode by incorporating flower-like MoS2 ... -
Flow properties of an Ahmed Body with different passive flow control methods
(Gazi Üniversitesi, 2024)A numerical simulation by utilizing the FloEFD software was carried out in order to investigate the flow topology formed on slant surface and wake region of an Ahmed Body with and without passive flow control techniques. ... -
Formation of a very high-density amorphous phase of carbon and its crystallization into a simple cubic structure at high pressure
(ELSEVIERRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2021)We report a direct computational evidence of a two-step transformation sequence for tetrahedral amorphous carbon (ta-C) with increasing pressure. First, ta-C gradually transforms into a very high-density amorphous phase ... -
Formation of resistant starch from amylotype corn starch and determination of the functional properties
(CODON PUBLICATIONS, 2013)High amylose corn starch was hydrolysed with HCl at 40 °C for 0.5-2.0 h. Then the native and acid-modified starch samples were subjected to 2 different heat treatments (HT). In HT1, heat treated/autoclaved samples were ... -
Fotonik Fener Tabanlı Eş‐Fazlı Alıcı Performans Analizi
(TUBİTAK, 2016)Bos uzay es fazlı algılama sistemlerinin performanslarını arttırmak için fotonik fenerli sistemler önerilmistir (US 9322992 ). Bu projede fotonik fenerli es fazlı alıcıların sistem performansına nasıl katkı yaptıkları ... -
A fractional-order mathematical model based on vaccinated and infected compartments of SARS-CoV-2 with a real case study during the last stages of the epidemiological event
(ELSEVIER, 2023)In 2020 the world faced with a pandemic spread that affected almost everything of humans’ social and health life. Regulations to decrease the epidemiological spread and studies to produce the vaccine of SARS-CoV-2 were ... -
Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading
(ELSEVIER SCIENCE SAPO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2021)This paper focuses on the mechanical properties and fracture behavior of newly developed body-centered-cubic structured TiTaHfNb, TiTaHfNbZr and TiTaHfMoZr high entropy alloys (HEAs) under impact loading as part of an ... -
A Framework for Web Application Integrity
(Current Publisher, 2018)Due to their universal accessibility, interactivity and scaling ease, Web applications relying on client-side code execution are currently the most common form of delivering applications and it is likely that they ... -
A Framework to Incorporate Decision-Maker Preferences Into Simulation Optimization to Support Collaborative Design
(IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC445 HOES LANE, PISCATAWAY, NJ 08855-4141, 2017)In this paper, we are concerned with the use of simulation optimization to handle collaborative design problems where more than one decision-maker is involved. We assume that the designers cannot enumerate all their ... -
Frequency and electric field controllable photodevice: FYTRONIX device
(ELSEVIERRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2017)Al/p-Si/BODIPY/Al diode was fabricated by forming BODIPY organic layer on p-Si having ohmic contact. The electrical and photoresponse properties of the prepared diode were investigated in detail. The current-voltage ( I-V) ... -
Fresh, Mechanical, Transport, and Durability Properties of Self-Consolidating Rubberized Concrete
(AMER CONCRETE INST, 2012)This paper presents the fresh, mechanical, transport, and durability performances of self-consolidating rubberized concretes (SCRCs). Fresh concrete properties were determined with slump flow, V-funnel, J-ring, and L-box ... -
FRET enabled light harvesting within quantum dot loaded nanofibers
(IOP PUBLISHING LTD, TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND, 2018)The spatial control of the nano-emitters in novel light harvesting platforms offers great potential for the manipulation of the excitonic interaction amongst the donor-acceptor pairs of energy transferring agents. In this ...
