Ara
Toplam kayıt 6, listelenen: 1-6
A detailed investigation of the effect of hydrogen on the mechanical response and microstructure of Al 7075 alloy under medium strain rate impact loading
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)
Effects of hydrogen and temperature on impact response and corresponding microstructure of aluminum (Al) 7075 alloy were investigated under medium strain rate impact loading. The specimens were subjected to impact energy ...
Microstructure and mechanical properties of dense Si3N4 ceramics prepared by direct coagulation casting and cold isostatic pressing
(ELSEVIER SCIENCE SA, 2022)
Complex shaped dense Si3N4 ceramics were produced by using direct coagulation casting technique via
dispersant reaction method of Si3N4 suspension, followed by gas pressure sintering. The effects of solid content of
the ...
Effect of construction and demolition waste on the long-term geo-environmental behaviour of cemented paste backfill
(SPRINGERONE NEW YORK PLAZA, SUITE 4600 , NEW YORK, NY 10004, UNITED STATES, 2021)
The construction and demolition waste (CDW) could be used as backfill material to fill the voids created during the ore production in underground mining. However, there is a need to clarify the impact of CDW on groundwater ...
Effect of characteristics of natural zeolites on their geopolymerization
(ELSEVIERRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2021)
The properties of clinoptilolite-based geopolymers are investigated with a focus on the parameters affecting the reactivity of clinoptilolite in a geopolymer binder. A complete characterization of raw materials was carried ...
Investigations of Electrical Resistivity and Thermal Conductivity Dependences on Growth Rate in the Al-Cu-Ti Eutectic Alloy
(SPRINGER/PLENUM PUBLISHERS233 SPRING ST, NEW YORK, NY 10013, 2021)
Directional solidification of Al-Cu-Ti (Al-33wt%Cu-0.1wt%Ti) eutectic alloy was done with a growth rate range (V = 8.58 to 2038.65 mu m.s(-1)) at a temperature gradient of 6.45 K.mm(-1) using Bridgman-type directional ...
A new parameter influencing the reaction kinetics and properties of fly ash based geopolymers: A pre-rest period before heat curing
(ELSEVIERRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2021)
In this study, the influence of a pre-rest period before heat curing (as a new parameter), on the physical properties, flexural and compressive strength, and microstructure of geopolymer mortars and pastes produced with ...