Makine Mühendisliği Bölümü Koleksiyonu
Recent Submissions
-
Design analysis of a wave energy converter for hydrogen generation near shoreline of Black Sea
(Institution of Chemical Engineers, 2024)The generation of electricity from waves has attracted a lot of attention from researchers lately. Despite the vastness and accessibility of wave energy across the majority of the planet, there is a dearth of literature ... -
Compensating energy demand of public transport and yielding green hydrogen with floating photovoltaic power plant
(Institution of Chemical Engineers, 2024)The last three decades have seen a dramatic increase in the renewable energy sector as a result of increased human energy consumption and environmental concerns about fossil fuels. Offshore renewable energy sources are the ... -
Edge dislocation depinning from hydrogen atmosphere in α-iron
(Acta Materialia Inc, 2024)Understanding the dislocation motion in hydrogen atmosphere is essential for revealing the hydrogen-related degradation in metallic materials. Atomic simulations were adopted to investigate the interaction between dislocations ... -
Role of Partial Flexibility on Flow Evolution and Aerodynamic Power Efficiency over a Turbine Blade Airfoil
(MDPI, 2024)In this study, the aerodynamic performance of a cambered wind turbine airfoil with a partially flexible membrane material on its suction surface was examined experimentally across various angles of attack and Reynolds ... -
Comparative study on bending behavior and damage analysis of 3D-printed sandwich core designs with bio-inspired reinforcements
(ELSEVIER, 2024)In this study, novel sandwich core designs with bio-inspired reinforcements were proposed and their bending behaviors were comparatively examined. The geometrical shapes of alligator osteoderm and chambered nautilus shell ... -
Indirect internal reforming SOFC accommodating graded-catalytic domain fabricated by paper-structured catalyst
(Electrochemical Society Inc., 2019)Biogas can be directly utilized in Solid Oxide Fuel Cells (SOFCs), as it can be reformed to H2-rich mixture in the anode of SOFCs. However, the rate of reforming reaction significantly changes along the flow field due to ... -
INVESTIGATION OF TEMPERATURE AND PRESSURE EFFECT ON THE HYDROGEN SORPTION KINETICS IN THE INTERFACE OF Mg/MgH2 BY MOLECULAR DYNAMICS
(International Association for Hydrogen Energy, IAHE, 2022)Molecular dynamics simulations were performed in order to analyze the hydrogen sorption kinetics between αMgH2 and hcp Mg structures under different temperatures and pressures. Results showed that hydrogen desorption from ... -
The Digitized Shoulder: From Preoperative Planning to Patient-Specific Guides
(SPRINGER LINK, 2022)As the information and computer technologies improve, it can change how the shoulder surgeries and treatments are done. Digitalization of the shoulder joint acquired via MR and CT (1) shows the surgeons the pathology in a ... -
Accurate Prediction of Residual Stresses in Machining of Inconel 718 Alloy through Crystal Plasticity Modelling
(Afyon Kocatepe Üniversitesi, 2023)Determination and assessment of residual stresses are crucial to prevent the failure of the components used in defense, aerospace and automotive industries. The objective of this study is to present a material method to ... -
GIS-AHP APPROACH FOR A COMPREHENSIVE FRAMEWORK TO DETERMINE THE SUITABLE REGIONS FOR GEOTHERMAL POWER PLANTS IN IZMIR, TÜRKİYE
(Konya Mühendislik, 2024)Geothermal energy is gaining more reputation and importance around the world. Correspondingly, suitable location selection is a critical step and has become necessary for the successful installation and operation of ... -
Flow properties of an Ahmed Body with different passive flow control methods
(Gazi Üniversitesi, 2024)A numerical simulation by utilizing the FloEFD software was carried out in order to investigate the flow topology formed on slant surface and wake region of an Ahmed Body with and without passive flow control techniques. ... -
Jet interactions in a feedback- free fluidic oscillator at low flow rate
(American Institute of Aeronautics and Astronautics Inc., 2013)In this work, the internal fluid dynamics and frequency characteristics of feedback-free fluidic oscillators are investigated experimentally for low flow rates below 3.4 mL/s. The internal flow field of feedback-free fluidic ... -
A review of fluidic oscillator development and application for flow control
(2013)This review provides a detailed discussion of the historical development of fluidic oscillators and their application to flow control. Fluidic oscillators were initially developed in the 1960's for a variety of applications, ... -
Development of a Nanoparticle-Embedded Chitosan Sponge for Topical and Local Administration of Chemotherapeutic Agents
(American Society of Mechanical Engineers (ASME), 2014)The following work describes the development of a novel noninvasive transmucosal drug delivery system, the chitosan sponge matrix (CSM). It is composed of cationic chitosan (CS) nanoparticles (NPs) that encapsulate cisplatin ... -
Localization of an autonomous personnel carrying vehicle in indoor environments
(Association for Computing Machinery, 2017)There is an emerging need of intelligent vehicles on indoor environments such as university campuses, airports or shopping malls. These intelligent vehicles can help elderly, disabled, or people with heavy luggage. This ... -
The influence of plastic deformation mechanisms on the adhesion behavior and collagen formation in osteoblast cells
(SPRINGER, 2018)In many of biomedical applications, the implant might get in direct contact with the bone tissue where the osteogenesis needs to be stimulated. If osteoblasts can not successfully attach on the implant surface, the bone ... -
Investigation of compressive performance of 3D printed carbon fiber reinforced plastics
(Soc. for the Advancement of Material and Process Engineering, 2018)The compressive performance of Carbon Fiber Reinforced Plastics (CFRP) is an extensive research area of crashworthy structures due to high Specific Energy Absorption (SEA) rates. However, the traditional composite manufacturing ... -
Mechatronic Components: Roadmap to Design
(ELSEVIER, 2018)Mechatronic Components: Roadmap to Design explains the practical application of mechatronics, including sections on adaptive structures, robotics and other areas where mechanics and electronics converge. Professional ... -
Experimental Investigation of Oblique Impact Behavior of Adhesively Bonded Composite Single-Lap Joints
(SPRINGER, 2022)Determining the impact behavior of adhesive joints allows the designing of high-strength joints. Therefore, the dynamic behavior of adhesive joints has recently become a trending research topic. The study aims to examine ... -
Ineffectiveness of flood cooling in reducing cutting temperatures during continuous machining
(SPRINGER, 2022)Water-based metalworking fluids are applied in the form of a liquid jet to flood the entire cutting zone and increase the tool life. The objective of this study is to investigate the effectiveness of flood cooling in ...
RSS 1.0
