Anhydrous proton conducting poly(vinyl alcohol) (PVA)/ poly(2-acrylamido-2-methylpropane sulfonic acid) (PAMPS)/1,2,4-triazole composite membrane
![Thumbnail](/xmlui/bitstream/handle/20.500.12573/1332/1-s2.0-S0360319916305419-main.pdf.jpg?sequence=4&isAllowed=y)
View/ Open
Access
info:eu-repo/semantics/openAccessDate
2016Author
Erkartal, MustafaAslan, Ayse
Erkilic, Ufuk
Dadi, Seyma
Yazaydin, Ozgur
Usta, Hakan
Sen, Unal
Metadata
Show full item recordAbstract
The design and fabrication of anhydrous proton exchange membranes are critically important for high temperature proton exchange membrane fuel cell (HT-PEMFC) operating between 100 and 200 °C. Herein, we demonstrate a novel proton conducting membrane consisting of poly(vinyl alcohol) (PVA), poly (2-acrylamido-2-methylpropane sulfonic acid) (PAMPS) and 1,2,4-triazole, which was fabricated by physical blending, casting and solvent evaporation techniques. The in-situ chemical cross-linking was performed by glutaraldehyde (GA) to improve the water management of the membranes. The molecular structure of the membranes and intermolecular interactions between the constituents were confirmed by Fourier-transform infrared spectroscopy (FT-IR). The surface and cross-section morphologies of the membranes were observed by scanning electron microscopy (SEM). The thermal stability performance of the membranes was studied with thermogravimetric analysis (TGA). In order to determine the physico-chemical properties of the membranes, water uptake (WU), dimensional change and ion exchange capacity (IEC) tests were carried out. The proton conductivities of composite membranes increase with the temperature and the temperature dependencies exhibit an Arrhenius behavior. Proton conductivity measurements revealed an optimum ratio between PAMPS and 1,2,4-triazole content to achieve higher proton conductivity. In anhydrous state at 150 °C, the highest proton conductivity measured was 0.002 S/cm for PVA:PAMPS:1,2,4-triazole (1:1:1) composition. Overall, our investigation showed that 1,2,4-triazole is a promising proton carrier reagent above 100 °C when it is embedded into appropriate host polymers.