• Landsat 8 Görüntüleri ile Cheney Rezervuarında Bulanıklık Tahmini: Regresyon, MARS ve TreeNet Yöntemlerinin Karşılaştırılması 

  Dilmen, Omer; Nacar, Sinan; Tunç Görmüş, Esra; Bayram, Adem (Halil AKINCI, 2024)

  Rezervuarlardaki su kalitesi takibi, suyun kullanım amacına uygunluğu ve su canlılarının korunması için önemlidir ve su kalitesinin belirlenmesinde en yaygın kullanılan değişkenlerden biri de bulanıklıktır. Bu değişkenin ...

• Efficiency of L-DOPA+TiO2 modified RO membrane on salinity gradient energy generation by pressure retarded osmosis 

  Ateş, Nuray; Saki, Seda; Gokcek, Murat; Uzal, Niğmet (Pamukkale Üniversitesi, 2024)

  Harvesting energy from the salinity gradient of seawater and river water using pressure retarded osmosis (PRO) has been a major research topic of recent years. However, there is a need for efficient PRO membranes that ...

• Effect of urbanization on surface runoff and performance of green roofs and permeable pavement for mitigating urban floods 

  Öztürk, Şevki; Yılmaz, Kutay; Dincer, Ali Ersin; Kalpakcı, Volkan (SPRINGER NATURE Link, 2024)

  Floods are increasingly becoming a significant concern due to climate change, global warming, and excessive urbanization. The Intergovernmental Panel on Climate Change (IPCC) has projected that global warming will continue ...

• Effects of clay type and component fineness on the hydration and properties of limestone calcined clay cement 

  Atasever, Muhammet; Erdoğan, Sinan Turhan (SPRINGER NATURE Link, 2024)

  Limestone calcined clay cement (LC3) is emerging as an alternative to Portland cement, offering economic advantages, reduced CO2 emissions, and mechanical properties on par with Portland cement. Central to the effective ...

• Characterization of Limestone Calcined Clay Cement Made with Calcium Sulfoaluminate Clinker 

  Atasever, Muhammet; Erdoğan, Sinan Turhan (SPRINGER, 2024)

  This study concentrated on producing limestone calcined clay calcium sulfoaluminate cement by replacing portland cement in limestone calcined clay cement with calcium sulfoaluminate cement, with the goal of increasing the ...

• A cleaner demolition scheduling methodology considering dust dispersion: A case study for a post-earthquake region 

  Dincer, Ali Ersin; Demir, Abdullah; Dilmen, Omer (ELSEVIER, 2024)

  In the present century, pollution is a primary concern for billions, prompting governments to advocate cleaner ways of production. Demolition activity is often an indispensable solution for structures that have completed ...

• Comparative analysis of hybrid geothermal-solar systems and solar PV with battery storage: Site suitability, emissions, and economic performance 

  Fedakar, Halil Ibrahim; Dinçer, Ali Ersin; Demir, Abdullah (ELSEVIER, 2024)

  Renewable energy integration has become a critical focus in the global effort to reduce carbon emissions and diversify energy sources. In regions with distinct geographic features, such as Türkiye, combining different ...

• Characterizing boron-enhanced one-part alkaline-activated mortars: Mechanical properties, microstructure and environmental impacts 

  Örklemez, Ezgi; İlkentapar, Serhan; Durak, Ugur; Gülçimen, Sedat; Uzal, Niğmet; Uzal, Burak; Karahan, Okan; Atiş, Cengiz Duran (ELSEVIER, 2024)

  Since alkali activators negatively effect the environmental impact assessment, it is necessary to develop the alternative activators from natural sources with low environmental impact. Therefore, in this study, the usage ...

• A Fully Coupled Numerical Model for Unbonded Post-tensioned Timber Structures 

  Dinçer, Ali Ersin; Demir, Abdullah (SPRINGER LINK, 2024)

  The paper presents a fully Lagrangian mesh-free solver to simulate the dynamic behavior of post-tensioned timber structures. Weakly Compressible Smoothed Particle Hydrodynamics (SPH) is employed to model both the timber ...

• The impact of Kahramanmaraş (2023) earthquakes: A comparative case study for Adıyaman and Malatya 

  Dinçer, Ali Ersin; Dincer, N. Nergiz; Tekin-Koru, Ayça; Yaşar, Burze; Yılmaz, Zafer (ELSEVIER, 2024)

  This study examines the effects of two major earthquakes of magnitude 7.7 and 7.6 that struck Kahramanmaraş on February 6th, 2023, followed by a magnitude 6.4 quake in Hatay on February 20th, which caused major damage in ...

• Experimental Study on Increase of Bonding Strength of FRP Reinforcement in Concrete 

  Taskin, Furkan; Ciftci, Cihan (SPRINGER LINK, 2022)

  In the last two decades, the use of fiber-reinforced polymer (FRP) bars is of great interest to reinforce concrete beam structures due to its high specific strength, effective corrosion resistance, and low cost fabrication. ...

• Developing New Empirical Formulae for the Resilient Modulus of Fine-Grained Subgrade Soils Using a Large Long-Term Pavement Performance Dataset and Artificial Neural Network Approach 

  Fedakar, Halil Ibrahim (SAGE Publications Ltd, 2022)

  Artificial neural network (ANN) has been successfully used for developing prediction models for resilient modulus (Mr). However, no reliable Mr formula derived from these models has been proposed in previous studies, ...

• GEAKDES: Gerçek Zamanlı Deprem Afet / Süreç Yönetimi İçin Yapay Zekâ Temelli Akıllı Karar Destek Sistemi 

  Özmen, Mihrimah; Akın, Müge; Yüksel, Muhammed Burak; Dedetürk, Bilge Kağan; Özcan, Orkan (TRDizin, 2024)

  Depremler, dünya genelinde sıkça görülen ve ciddi etkiler yaratan doğal felaketlerdir. Modern teknoloji, özellikle sismik olarak aktif bölgelerde, gerçek zamanlı sismik ölçümlerle hızlı müdahale imkanı sağlar. Deprem sonrası ...

• Rehabilitation of water and environment of the TKI - GELI/YLI opencast mine lakes 

  Delibalta, Mahmut Suat; Uzal, Niğmet (Chamber of Mining Engineers of Turkey, 2013)

  During the search, production and enrichment process of mining operations the air, soil, water resources and living organisms are affected adversely. In coal opencast production, with the rise of surface water and ground ...

• Properties of concrete with high-volume pozzolans 

  Uzal, Burak (ELSEVIER, 2013)

  This chapter focuses on the materials and properties of high-volume natural pozzolan (HVNP) concrete. The characteristics of natural pozzolans used in high-volume pozzolan mixtures are discussed, together with the fresh ...

• Determining the priority waste in aluminum manufacturing sector using the smaa-2 method: A case study of kayseri 

  Aydogan, Emel Kizilkaya; Ates, Nuray; Uzal, Nigmet; Ozmen, Mihrimah (Computers and Industrial Engineering, 2014)

  Small and medium-sized enterprises (SMEs) constitute a major part of the Turkish economy, accounting for a large proportion of the country's businesses and total employment. Although the SMEs are known as important ...

• Modeling of suspended sediment concentration carried in natural streams using fuzzy genetic approach 

  Kisi, Ozgur; Fedakar, Halil Ibrahim (SPRINGER LINK, 2014)

  This chapter proposes fuzzy genetic approach so as to predict suspended sediment concentration (SSC) carried in natural rivers for a given stream cross section. Fuzzy genetic models are improved by combining two methods, ...

• Effluent treatment in denim and jeans manufacture 

  Uzal, Nigmet (ELSEVIER, 2015)

  This chapter discusses the major strategies that should be considered in the treatment of denim dyeing and jeans processing wastewater. It first gives an overview of wastewater characteristics and further elaborates on the ...

• Potential ion exchange membranes and system performance in reverse electrodialysis for power generation: A review 

  Hong, Jin Gi; Zhang, Bopeng; Glabman, Shira; Uzal, Nigmet; Dou, Xiaomin; Zhang, Hongguo; Wei, Xiuzhen; Chen, Yongsheng (ELSEVIER, 2015)

  Reverse electrodialysis (RED) is an emerging membrane-based energy conversion process used to extract electricity by mixing two water streams of different salinities. This technique utilizes transport of cations and anions ...

• Effect of ambient temperature on the flexural behavior of 3D printed composite beams 

  Yıldırım, Afşin Talha; Eroglu, Fatih; Yesilyurt, Ogulcan; Albayrak, Kubilay; Sas, Hatice S.; Ciftci, Cihan (Soc. for the Advancement of Material and Process Engineering, 2018)

  Adaptation of the additive manufacturing technology with 3D printers may lead to a new track in the manufacturing of composite materials. This additive manufacturing technology aims to mitigate manufacturing challenges and ...

Daha Fazla