Erişim şekli için "info:eu-repo/semantics/closedAccess" Makine Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 73, listelenen: 21-40
-
Experimental investigation on chloroprene and acrylonitrile butadiene rubber types reinforced with nano-materials
(IOP PUBLISHING LTD, TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND, 2019)In this research, the effects of three different nano-materials (Nano-Carbon Black, Nano-ZnO, and Multi-Walled Carbon Nanotubes (MWNTs)) on two different rubber types (Chloroprene Rubber (CR), and Acrylonitrile Butadiene ... -
Finding Glenoid Surface on Scapula in 3D Medical Images for Shoulder Joint Implant Operation Planning-3D OCR
(SPIE-INT SOC OPTICAL ENGINEERING1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA, 2017)Medical imaging has great importance in earlier detection, better treatment and follow-up of diseases. 3D Medical image analysis with CT Scan and MRI images has also been used to aid surgeries by enabling patient specific ... -
Finite Element Analysis of Low-Speed Oblique Impact Behavior of Adhesively Bonded Composite Single-Lap Joints
(SPRINGER, 2023)The development of a realistic numerical model that predicts the impact behavior of adhesively bonded composite joints is important for many industrial sectors such as automotive, aerospace, and marine. In this study, it ... -
Finite Element Analysis of the Stress Distribution Associated With Different Implant Designs for Different Bone Densities
(WILEY, 2022)Purpose: The main objective of this study was to investigate the influence of implant design, bone type, and abutment angulation on stress distribution around dental implants. Materials and methods: Two implant designs ... -
Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading
(ELSEVIER SCIENCE SAPO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2021)This paper focuses on the mechanical properties and fracture behavior of newly developed body-centered-cubic structured TiTaHfNb, TiTaHfNbZr and TiTaHfMoZr high entropy alloys (HEAs) under impact loading as part of an ... -
High-concentration carbon assists plasticity-driven hydrogen embrittlement in a Fe-high Mn steel with a relatively high stacking fault energy
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2018)We investigated the effects of electrochemical hydrogen charging on the mechanical properties of a Fe-33Mn-1.1C austenitic steel with high carbon concentration and relatively high stacking fault energy. Hydrogen pre charging ... -
Human-oriented approaches for assistive and rehabilitation robotics - Engineering methods, technical implementation, and treatment
(ELSEVIERRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2017)Human-oriented approaches for assistive and rehabilitation robotics - Engineering methods, technical implementation, and treatment -
Hybrid Power System for Mobile Robotics
(IEEE345 E 47TH ST, NEW YORK, NY 10017 USA, 2016)The power source is a design characteristic for a mobile robot in which the energy source used must provide enough power for a desired period of time depending on the specific task of a robot. Batteries are the most common ... -
Image processing methodology for patient-specific instrument design
(WILEY, 111 RIVER ST, HOBOKEN 07030-5774, NJ USA, 2020)Background Patient-specific instrumentation (PSI) improves accuracy of surgical operations. PSI needs software for preoperative planning and instrument design. In this study, we explain the methodology of developing a ... -
Ineffectiveness of flood cooling in reducing cutting temperatures during continuous machining
(SPRINGER, 2022)Water-based metalworking fluids are applied in the form of a liquid jet to flood the entire cutting zone and increase the tool life. The objective of this study is to investigate the effectiveness of flood cooling in ... -
The influence of plastic deformation mechanisms on the adhesion behavior and collagen formation in osteoblast cells
(SPRINGER, 2018)In many of biomedical applications, the implant might get in direct contact with the bone tissue where the osteogenesis needs to be stimulated. If osteoblasts can not successfully attach on the implant surface, the bone ... -
INTERNAL FLOW PHYSICS OF A FLUIDIC OSCILLATOR SPRAY IN THE TRANSITION REGIME
(BEGELL HOUSE INC50 NORTH ST, DANBURY, CT 06810, 2016)An experimental investigation of the underlying flow physics of a dual-jet interaction fluidic oscillator spray has been conducted in the transition regime for a Reynolds number of 1680. The transition regime is defined ... -
Internal jet interactions in a fluidic oscillator at low flow rate
(SPRINGER, 2014)This study focuses on the internal jet interactions and the oscillation mechanism of the feedback-free fluidic oscillator at low flow rate, corresponding to a Reynolds number of 1,350 (based on exit nozzle width and average ... -
Investigating the best automatic programming method in predicting the aerodynamic characteristics of wind turbine blade
(PERGAMON-ELSEVIER SCIENCE LTD, 2023)Automatic programming (AP) is a subfield of artificial intelligence (AI) that can automatically generate computer programs and solve complex engineering problems. This paper presents the accuracy of four different AP methods ... -
Investigation of compressive performance of 3D printed carbon fiber reinforced plastics
(Soc. for the Advancement of Material and Process Engineering, 2018)The compressive performance of Carbon Fiber Reinforced Plastics (CFRP) is an extensive research area of crashworthy structures due to high Specific Energy Absorption (SEA) rates. However, the traditional composite manufacturing ... -
Investigation of the effect of hidden vortex generator-flap integrated mechanism revealed in low velocities on wind turbine blade flow
(PERGAMON-ELSEVIER SCIENCE, 2023)In this study, the flap and vortex generator (VG) mechanisms which were employed separately in aircraft were used as integrated first in literature. In this mechanism, the flap motion triggered and activated the VGs when ... -
Investigations of strain rate, size, and crack length effects on the mechanical response of polycaprolactone electrospun membranes
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)The effects of strain rate, size (height x width), and pre-existing crack length on the mechanical response of polycaprolactone electrospun membranes were investigated by tension tests conducted at room temperature. In ... -
Jet interactions in a feedback- free fluidic oscillator at low flow rate
(American Institute of Aeronautics and Astronautics Inc., 2013)In this work, the internal fluid dynamics and frequency characteristics of feedback-free fluidic oscillators are investigated experimentally for low flow rates below 3.4 mL/s. The internal flow field of feedback-free fluidic ... -
Loading-rate effect on tensile and bending strength of 3D-printed polylactic acid adhesively bonded joints
(TAYLOR & FRANCIS LTD2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2021)Additive manufacturing provides the production of many machine parts and components with complex geometries. The adhesive bonding technique can be alternative method for joining parts produced with additive manufacturing. ... -
Localization of an autonomous personnel carrying vehicle in indoor environments
(Association for Computing Machinery, 2017)There is an emerging need of intelligent vehicles on indoor environments such as university campuses, airports or shopping malls. These intelligent vehicles can help elderly, disabled, or people with heavy luggage. This ...