Browsing Makine Mühendisliği Bölümü Koleksiyonu by Title
Now showing items 1-20 of 89
-
An accurate investigation of the mechanical response and damage model of aluminum 7068
(Abdullah Gül Üniversitesi, 2018)The promising combination of high strength, high toughness, low density and corrosion resistivity have made aluminium (Al) alloys the material of choice in various applications, from buildings to aerospace, for decades. ... -
Anhydrous proton conducting poly(vinyl alcohol) (PVA)/ poly(2-acrylamido-2-methylpropane sulfonic acid) (PAMPS)/1,2,4-triazole composite membrane
(Elsevier Ltd, 2016)The design and fabrication of anhydrous proton exchange membranes are critically important for high temperature proton exchange membrane fuel cell (HT-PEMFC) operating between 100 and 200 °C. Herein, we demonstrate a novel ... -
Application of Classical Lamination Theory to Fused Deposition Method 3-D Printed Plastics and Full Field Surface Strain Mapping
(Afyon Kocatepe Üniversitesi, 2022)In this study, five differently oriented sets of 3D-printed tensile samples are produced using the Fused Deposition Method (FDM). Among these five sets, three are used to determine the elastic constant to be used in Classical ... -
Characterization of 3D fabric permeability with skew terms
(ELSEVIER SCI LTDTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND, 2017)Flow simulations can predict resin flow behavior and void formation locations in a preform. One important parameter for simulation is the preform permeability. For thick parts with distribution media on the surface, resin ... -
A Comparison of Ensemble and Base Learner Algorithms for the Prediction of Machining Induced Residual Stresses in the Turning of Aerospace Materials
(Bitlis Eren Üniversitesi, 2022)The estimation of residual stresses is essential to prevent the catastrophic failures of the components used in the aerospace industry. The objective of this work is to predict the machining induced residual stresses with ... -
Corrosion behavior of novel Titanium-based high entropy alloys designed for medical implants
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2020)This paper reports on the corrosion behavior of three TiTaHf-based high entropy alloys (HEAs) in simulated body fluid (SBF) and artificial saliva (AS) in order to assess their potential utility as implant materials. ... -
A detailed investigation of the effect of hydrogen on the mechanical response and microstructure of Al 7075 alloy under medium strain rate impact loading
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)Effects of hydrogen and temperature on impact response and corresponding microstructure of aluminum (Al) 7075 alloy were investigated under medium strain rate impact loading. The specimens were subjected to impact energy ... -
DETERMINATION OF MATERIAL RESPONSE AND OPTIMIZATION OF JOHNSON-COOK DAMAGE PARAMETERS OF ALUMINIUM 7075 ALLOY
(Selçuk Üniversitesi, 2018)The effects of rolling direction and notch radius on the mechanical response of aluminium7075-T651 alloy were investigated and the Johnson-Cook damage parameters of aluminium 7075-T651alloy on both rolling directions were ... -
Development of an optical measurement system for surface depth measurements and study of focus effect on determination of steel inclusion content by EN-10247
(SPIE-SOC PHOTO-OPTICAL INSTRUMENTATION ENGINEERS1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98225, 2021)Surface inspections are important in steelmaking processes to characterize the final product's quality. We present a method to measure surface depth profile using laser scattering geometry. This technique is used to analyze ... -
Development of highly transparent Pd-coated Ag nanowire electrode for display and catalysis applications
(ELSEVIER, 2015)Ag nanowire transparent electrode has excellent transmittance (90%) and sheet resistance (20 Omega/sq), yet there are slight drawbacks such as optical haze and chemical instability against aerial oxidation. Chemical stability ... -
The effect of different tabbing methods on the damage progression and failure of carbon fiber reinforced composite material under tensile loading
(ELSEVIER SCI LTD, 2022)Composites are well-known and widely used materials due to their anisotropic nature and high strength-to-weight ratio; therefore, the mechanical performance of these materials is crucial. Precise tensile testing is essential ... -
Effect of Geometry Modifications on the Vectoring Performance of a Controlled Jet
(ISFAHAN UNIV TECHNOLOGY, MECHANICAL ENGINEEING DEPT, JAFM OFFICE, ISFAHAN, 84156-83111, IRAN, 2017)Jet vectoring performances of ten different designs with various depths and geometrical outlines were quantified through constant temperature anemometry measurements for a Reynolds number range from 10,000 to 30,000 by ... -
Effect of hydrogen on fracture locus of Fe-16Mn-0.6C-2.15Al TWIP steel
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)Effect of hydrogen on the mechanical response and fracture locus of commercial TWIP steel was investigated comprehensively by tensile testing TWIP steel samples at room temperature and quasi-static regime. 5 different ... -
Effect of pre-rolling temperature on the interfacial properties and formability of steel-steel bilayer sheet in Single Point Incremental Forming
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)The aim of this research was to investigate the effect of pre-rolling temperature on the interfacial properties in delamination modes 1 and 2; and formability in Single Point Incremental Forming (SPIF) of Steel-Steel (St-St) ... -
Effect of strain rate on hydrogen embrittlement susceptibility of twinning-induced plasticity steel pre-charged with high-pressure hydrogen gas
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2016)The effects of tensile strain rate on the hydrogen-induced mechanical and microstructural features of a twinning-induced plasticity (TWIP) steel were investigated using a Fe-23Mn-0.5C steel with a saturated amount of ... -
The Effect of Strain Rate on the Hydrogen Embrittlement Susceptibility of Aluminum 7075
(ASME, 2023)The effects of changing the strain rate regime from quasi-static to medium on hydrogen susceptibility of aluminum (Al) 7075 were investigated using tensile tests. Strain rates were selected as 1 s(-1) and 10(-3) s(-1) and ... -
The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites
(SPRINGER INDIA, 7TH FLOOR, VIJAYA BUILDING, 17, BARAKHAMBA ROAD, NEW DELHI, 110 001, INDIA, 2020)The aim of this study is to produce composite materials by recycling metallic chips, which are found in industry as a large amount of waste. In addition, it is aimed to investigate the effect of ultrasonic cleaning process ... -
Effects of total cost of ownership on automobile purchasing decisions
(TAYLOR & FRANCIS LTD, 2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2020)In this paper, we reveal a complete picture of ownership-related expenses and construct a decision model which helps decision maker to make the best choice when purchasing an automobile. The decision model helps the customers ... -
Enhancement of Anhydrous Proton Conductivity of Poly(vinylphosphonic acid)-Poly(2,5-benzimidazole) Membranes via In Situ Polymerization
(WILEY-V C H VERLAG GMBH, 2015)Polymer electrolyte membranes (PEMs) are synthesized via in situ polymerization of vinylphosphonic acid (VPA) within a poly(2,5-benzimidazole) (ABPBI) matrix. The characterization of the membranes is carried out by using ... -
Experimental and Molecular Dynamics Simulation-Based Investigations on Hydrogen Embrittlement Behavior of Chromium Electroplated 4340 Steel
(ASMETWO PARK AVE, NEW YORK, NY 10016-5990, 2021)In this study, chromium electroplating process, corresponding hydrogen embrittlement, and the effects of baking on hydrogen diffusion are investigated. Three types of materials in the form of Raw 4340 steel, Chromium ...
