Kategori "Makale - Uluslararası - Editör Denetimli Dergi" Makine Mühendisliği Bölümü Koleksiyonu İçin Listeleme
Toplam kayıt 44, listelenen: 21-40
-
Lateral Angular Co-Extrusion: Geometrical and Mechanical Properties of Compound Profiles
(MDPI, ST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2020)A novel co-extrusion process for the production of coaxially reinforced hollow profiles has been developed. Using this process, hybrid hollow profiles made of the aluminum alloy EN AW-6082 and the case-hardening steel ... -
Loading-rate effect on tensile and bending strength of 3D-printed polylactic acid adhesively bonded joints
(TAYLOR & FRANCIS LTD2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2021)Additive manufacturing provides the production of many machine parts and components with complex geometries. The adhesive bonding technique can be alternative method for joining parts produced with additive manufacturing. ... -
Low velocity oblique impact behavior of adhesively bonded single lap joints
(TAYLOR & FRANCIS LTD, 2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2019)This article addresses the low velocity oblique impact behavior of adhesively bonded single lap joints, and the effects of adherend strength and plastic ductility, impact energy, overlap length and oblique impact angle on ... -
Low-speed bending impact behaviour of adhesively bonded dissimilar single-lap joints
(TAYLOR & FRANCIS LTD2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2021)This study investigates the low-speed bending impact behaviour of adhesively bonded dissimilar single-lap joints and the effects of both strength and plastic deformation capability of adherend material on adhesive failure. ... -
Lowering Strain Rate Simultaneously Enhances Carbon- and Hydrogen-Induced Mechanical Degradation in an Fe-33Mn-1.1C Steel
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2019)We investigated the strain rate dependency of the hydrogen-induced mechanical degradation of Fe-33Mn-1.1C steel at 303K within the strain rate range of 10(-2) to 10(-5)s(-1). In the presence of hydrogen, lowering the strain ... -
Magnus series expansion method for solving nonhomogeneous stiff systems of ordinary differential equations
(ACADEMIC PUBLICATION COUNCILPO BOX 17225, KHALDIYA 72453, KUWAIT, 2016)In this paper, Magnus Series Expansion Method, which is based on Lie Groups and Lie algebras is proposed with different orders to solve nonhomogeneous stiff systems of ordinary differential equations. Using multivariate ... -
Makerspace: Innovation in Mechanical Engineering Education
(2021)The complexity of industrial developments requires engineering students to have hands on experience as well as theoretical engineering knowledge. There is a need for a change of classical engineering curriculums. Makerspaces ... -
Microstructure and tribological properties of TiTaHfNbZr high entropy alloy coatings deposited on Ti-6Al-4V substrates
(ELSEVIER SCI LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND, 2019)We report on the microstructure and tribological behavior of equimolar TiTaHfNbZr high entropy alloy (HEA) thin films deposited on the biomedical Ti-6Al-4V substrates by RF magnetron sputtering. Results of nanoindentation ... -
Modulating the Surface Properties of Metallic Implants and the Response of Breast Cancer Cells by Surface Relief Induced via Bulk Plastic Deformation
(FRONTIERS MEDIA SA, AVENUE DU TRIBUNAL FEDERAL 34, LAUSANNE, CH-1015, SWITZERLAND, 2020)Micro/nanoscale textured surfaces have presented promising tissue-implant integration via increasing surface roughness, energy, and wettability. Recent studies indicate that surface texture imparted on the metallic implants ... -
On the Utility of Crystal Plasticity Modeling to Uncover the Individual Roles of Microdeformation Mechanisms on the Work Hardening Response of Fe-23Mn-0.5C TWIP Steel in the Presence of Hydrogen
(ASME, TWO PARK AVE, NEW YORK, NY 10016-5990 USA, 2018)This paper presents a combined experimental and theoretical analysis focusing on the individual roles of microdeformation mechanisms that are simultaneously active during the deformation of twinning-induced plasticity ... -
Optimization Study on Surface Roughness and Tribological Behavior of Recycled Cast Iron Reinforced Bronze MMCs Produced by Hot Pressing
(MDPIST ALBAN-ANLAGE 66, CH-4052 BASEL, SWITZERLAND, 2021)Surface roughness reflects the quality of many operational parameters, namely service life, wear characteristics, working performance and tribological behavior of the produced part. Therefore, tribological performance is ... -
Performance and Durability of One-Cell Module of Biogas-Utilizing SOFC Equipped with Graded Indirect Internal Reformer
(ELECTROCHEMICAL SOC INC, 65 SOUTH MAIN STREET, PENNINGTON, NJ 08534 USA, 2020)Utilization of biogas in Solid Oxide Fuel Cells (SOFCs) is an efficient way of renewable power generation. Despite some technical challenges, biogas can be reformed to H-2-rich fuel stream in the anodes of SOFCs. However, ... -
Phase-Synchronized Fluidic Oscillator Pair
(AMER INST AERONAUTICS ASTRONAUTICS, 1801 ALEXANDER BELL DRIVE, STE 500, RESTON, VA 22091-4344 USA, 2019)The relative phase of oscillating jets from a pair of fluidic oscillators was synchronized in this work. The means for this synchronization was mutual interaction through a shared feedback channel between the two oscillators. ... -
The Precise Determination of the Johnson-Cook Material and Damage Model Parameters and Mechanical Properties of an Aluminum 7068-T651 Alloy
(ASME, TWO PARK AVE, NEW YORK, NY 10016-5990 USA, 2019)Al 7068-T651 alloy is one of the recently developed materials used mostly in the defense industry due to its high strength, toughness, and low weight compared to steels. The aim of this study is to identify the Johnson-Cook ... -
Proton conducting poly(vinyl alcohol) (PVA)/poly (2-acrylamido-2-methylpropane sulfonic acid) (PAMPS)/zeolitic imidazolate framework (ZIF) ternary composite membrane
(ELSEVIERRADARWEG 29, 1043 NX AMSTERDAM, NETHERLANDS, 2016)The design, synthesis and characterization of novel proton exchange membranes (PEMs) are of significant scientific and technological importance for the realization of fuel cells, actuators, and sensors. Here, we demonstrate ... -
Proton Conducting Self-Assembled Metal-Organic Framework/Polyelectrolyte Hollow Hybrid Nanostructures
(AMER CHEMICAL SOC1155 16TH ST, NW, WASHINGTON, DC 20036, 2016)Herein, a room temperature chemical process to synthesize functional, hollow nanostructures from zeolitic imidazolate framework-8 (ZIF-8) and poly(vinylphosphonic acid) (PVPA) is reported. Syntheses are initiated by ... -
Real representatives of equisingular strata of simple quartic surfaces
(WORLD SCIENTIFIC PUBL CO PTE LTD, 5 TOH TUCK LINK, SINGAPORE 596224, SINGAPORE, 2019)We develop an algorithm detecting real representatives in equisingular strata of projective models of K3-surfaces. We apply this algorithm to spatial quartics and find two new examples of real strata without real ... -
The role of hydrogen in the edge dislocation mobility and grain boundary-dislocation interaction in alpha-Fe
(PERGAMON-ELSEVIER SCIENCE LTDTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2021)The atomistic mechanisms of dislocation mobility depending on the presence of hydrogen were investigated for two edge dislocation systems that are active in the plasticity of alpha-Fe, specifically 1/2<111>{110} and ... -
Solution of jamming transition problem using adomian decomposition method
(EMERALD GROUP PUBLISHING LTD, HOWARD HOUSE, WAGON LANE, BINGLEY BD16 1WA, W YORKSHIRE, ENGLAND, 2018)Purpose The purpose of the study is to obtain an analytical approximate solution for jamming transition problem (JTP) using Adomian decomposition method (ADM). Design/methodology/approach In this study, the jamming ... -
Structural profile matrices for predicting structural properties of proteins
(WORLD SCIENTIFIC PUBL CO PTE LTD, 5 TOH TUCK LINK, SINGAPORE 596224, SINGAPORE, 2020)Predicting structural properties of proteins plays a key role in predicting the 3D structure of proteins. In this study, new structural profile matrices (SPM) are developed for protein secondary structure, solvent accessibility ...