Başlık için Makine Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 104, listelenen: 18-37
-
Development of high-performance nanostructured aluminum and its constitutive modeling
(Taylor and Francis Ltd., 2023)A new technique, an in-situ hot-extrusion-based synthesizing process, is proposed to develop high-performance nanocrystalline aluminum (nc-Al) with an optimally tuned strength-to-ductility ratio suitable for various ... -
Development of highly transparent Pd-coated Ag nanowire electrode for display and catalysis applications
(ELSEVIER, 2015)Ag nanowire transparent electrode has excellent transmittance (90%) and sheet resistance (20 Omega/sq), yet there are slight drawbacks such as optical haze and chemical instability against aerial oxidation. Chemical stability ... -
The effect of different tabbing methods on the damage progression and failure of carbon fiber reinforced composite material under tensile loading
(ELSEVIER SCI LTD, 2022)Composites are well-known and widely used materials due to their anisotropic nature and high strength-to-weight ratio; therefore, the mechanical performance of these materials is crucial. Precise tensile testing is essential ... -
Effect of Geometry Modifications on the Vectoring Performance of a Controlled Jet
(ISFAHAN UNIV TECHNOLOGY, MECHANICAL ENGINEEING DEPT, JAFM OFFICE, ISFAHAN, 84156-83111, IRAN, 2017)Jet vectoring performances of ten different designs with various depths and geometrical outlines were quantified through constant temperature anemometry measurements for a Reynolds number range from 10,000 to 30,000 by ... -
Effect of hydrogen on fracture locus of Fe-16Mn-0.6C-2.15Al TWIP steel
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)Effect of hydrogen on the mechanical response and fracture locus of commercial TWIP steel was investigated comprehensively by tensile testing TWIP steel samples at room temperature and quasi-static regime. 5 different ... -
Effect of pre-rolling temperature on the interfacial properties and formability of steel-steel bilayer sheet in Single Point Incremental Forming
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)The aim of this research was to investigate the effect of pre-rolling temperature on the interfacial properties in delamination modes 1 and 2; and formability in Single Point Incremental Forming (SPIF) of Steel-Steel (St-St) ... -
Effect of strain rate on hydrogen embrittlement susceptibility of twinning-induced plasticity steel pre-charged with high-pressure hydrogen gas
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2016)The effects of tensile strain rate on the hydrogen-induced mechanical and microstructural features of a twinning-induced plasticity (TWIP) steel were investigated using a Fe-23Mn-0.5C steel with a saturated amount of ... -
The Effect of Strain Rate on the Hydrogen Embrittlement Susceptibility of Aluminum 7075
(ASME, 2023)The effects of changing the strain rate regime from quasi-static to medium on hydrogen susceptibility of aluminum (Al) 7075 were investigated using tensile tests. Strain rates were selected as 1 s(-1) and 10(-3) s(-1) and ... -
The Effect of Ultrasonic Cleaning Upon Mechanical Properties of Metal Matrix Composites
(SPRINGER INDIA, 7TH FLOOR, VIJAYA BUILDING, 17, BARAKHAMBA ROAD, NEW DELHI, 110 001, INDIA, 2020)The aim of this study is to produce composite materials by recycling metallic chips, which are found in industry as a large amount of waste. In addition, it is aimed to investigate the effect of ultrasonic cleaning process ... -
Effects of total cost of ownership on automobile purchasing decisions
(TAYLOR & FRANCIS LTD, 2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2020)In this paper, we reveal a complete picture of ownership-related expenses and construct a decision model which helps decision maker to make the best choice when purchasing an automobile. The decision model helps the customers ... -
Enhancement of Anhydrous Proton Conductivity of Poly(vinylphosphonic acid)-Poly(2,5-benzimidazole) Membranes via In Situ Polymerization
(WILEY-V C H VERLAG GMBH, 2015)Polymer electrolyte membranes (PEMs) are synthesized via in situ polymerization of vinylphosphonic acid (VPA) within a poly(2,5-benzimidazole) (ABPBI) matrix. The characterization of the membranes is carried out by using ... -
Experimental and Molecular Dynamics Simulation-Based Investigations on Hydrogen Embrittlement Behavior of Chromium Electroplated 4340 Steel
(ASMETWO PARK AVE, NEW YORK, NY 10016-5990, 2021)In this study, chromium electroplating process, corresponding hydrogen embrittlement, and the effects of baking on hydrogen diffusion are investigated. Three types of materials in the form of Raw 4340 steel, Chromium ... -
An experimental and numerical study of the exchange current density in an HTPEM fuel cell
(WILEY-V C H VERLAG GMBHPOSTFACH 101161, 69451 WEINHEIM, GERMANY, 2021)The purpose of this study is to examine the effects of exchange current density, as dependent on operating parameters, on the activation polarization in an HTPEM fuel cell. In line with this purpose, cell performance tests ... -
Experimental flow control investigation over suction surface of turbine blade with local surface passive oscillation
(Elsevier, 2022)Impact of the local flexible membrane (LFM) on aerodynamic phenomena including the formation of a laminar separation bubble (LSB) and transition to turbulence was experimentally investigated over the suction surface of a ... -
Experimental investigation on chloroprene and acrylonitrile butadiene rubber types reinforced with nano-materials
(IOP PUBLISHING LTD, TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND, 2019)In this research, the effects of three different nano-materials (Nano-Carbon Black, Nano-ZnO, and Multi-Walled Carbon Nanotubes (MWNTs)) on two different rubber types (Chloroprene Rubber (CR), and Acrylonitrile Butadiene ... -
Farklı Mikroyapısal Değişkenlerin Yüksek Manganlı Fe-%33Mn Çeliğinin Pekleşme Davranışına Etkilerinin Araştırılması
(TUBİTAK, 2019)İleri yüksek mukavemetli çelikler sahip olmuş oldukları yüksek mukavemet, yüksek süneklik ve yüksek pekleşme kabiliyeti gibi üstün özellikler sayesinde otomotiv, demiryolu, savunma sanayi uygulamalarında ve yapı endüstrisi ... -
Finding Glenoid Surface on Scapula in 3D Medical Images for Shoulder Joint Implant Operation Planning-3D OCR
(SPIE-INT SOC OPTICAL ENGINEERING1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA, 2017)Medical imaging has great importance in earlier detection, better treatment and follow-up of diseases. 3D Medical image analysis with CT Scan and MRI images has also been used to aid surgeries by enabling patient specific ... -
Finite Element Analysis of Low-Speed Oblique Impact Behavior of Adhesively Bonded Composite Single-Lap Joints
(SPRINGER, 2023)The development of a realistic numerical model that predicts the impact behavior of adhesively bonded composite joints is important for many industrial sectors such as automotive, aerospace, and marine. In this study, it ... -
Finite Element Analysis of the Stress Distribution Associated With Different Implant Designs for Different Bone Densities
(WILEY, 2022)Purpose: The main objective of this study was to investigate the influence of implant design, bone type, and abutment angulation on stress distribution around dental implants. Materials and methods: Two implant designs ... -
Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading
(ELSEVIER SCIENCE SAPO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2021)This paper focuses on the mechanical properties and fracture behavior of newly developed body-centered-cubic structured TiTaHfNb, TiTaHfNbZr and TiTaHfMoZr high entropy alloys (HEAs) under impact loading as part of an ...