Erişim şekli için "info:eu-repo/semantics/closedAccess" Makine Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 85, listelenen: 1-20
-
Axial free vibration analysis of a tapered nanorod using Adomian decomposition method
(TECHNO-PRESS, 2025)This study aimed to conduct an analysis of the axial free vibration of tapered nanorods based on nonlocal elasticity theory. The small-scale effect on the free axial vibration of a tapered nanorod was studied employing the ... -
Biogas intake pressure and port air swirl optimization to enhance the diesel RCCI engine characteristics for low environmental emissions
(Institution of Chemical Engineers, 2024)Exhaust emission and combustion control in RCCI (reactivity-controlled compression ignition) focused mainly on the direct-injected fuel parameters, urging to investigate the advantages of port-fuel intake parameters. ... -
Characterization of 3D fabric permeability with skew terms
(ELSEVIER SCI LTDTHE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND, 2017)Flow simulations can predict resin flow behavior and void formation locations in a preform. One important parameter for simulation is the preform permeability. For thick parts with distribution media on the surface, resin ... -
Comparative study on bending behavior and damage analysis of 3D-printed sandwich core designs with bio-inspired reinforcements
(ELSEVIER, 2024)In this study, novel sandwich core designs with bio-inspired reinforcements were proposed and their bending behaviors were comparatively examined. The geometrical shapes of alligator osteoderm and chambered nautilus shell ... -
Compensating energy demand of public transport and yielding green hydrogen with floating photovoltaic power plant
(Institution of Chemical Engineers, 2024)The last three decades have seen a dramatic increase in the renewable energy sector as a result of increased human energy consumption and environmental concerns about fossil fuels. Offshore renewable energy sources are the ... -
A comprehensive experimental and modeling study of the strain rate- and temperature-dependent deformation behavior of bio-degradable Mg-CeO2 nanocomposites
(ELSEVIER, 2024)A comprehensive study was undertaken on the temperature-dependent and strain rate-sensitive deformation behavior of near-dense low-volume fraction magnesium-cerium dioxide (Mg-CeO2 ) nanocomposites synthesized by powder ... -
Compression performance of 3D-printed ant-inspired lattice structures: An innovative design approach
(Sage Journals, 2025)In this study, three different ant-inspired lattice design types: single, double, and inverted double structures were considered due to ants' excellent load-carrying weight ratio. Lattice structures were fabricated using ... -
Corrosion behavior of novel Titanium-based high entropy alloys designed for medical implants
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2020)This paper reports on the corrosion behavior of three TiTaHf-based high entropy alloys (HEAs) in simulated body fluid (SBF) and artificial saliva (AS) in order to assess their potential utility as implant materials. ... -
Deformation behavior of nanostructured aluminum: Experiment and computational study
(Elsevier Ltd, 2023)Nanocrystalline metals have been processed from powder predecessors in recent times in significant ways, and nowadays, materials are starting to be manufactured which are not only strong but also ductile. Nanocrystalline ... -
Design analysis of a wave energy converter for hydrogen generation near shoreline of Black Sea
(Institution of Chemical Engineers, 2024)The generation of electricity from waves has attracted a lot of attention from researchers lately. Despite the vastness and accessibility of wave energy across the majority of the planet, there is a dearth of literature ... -
A detailed investigation of the effect of hydrogen on the mechanical response and microstructure of Al 7075 alloy under medium strain rate impact loading
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)Effects of hydrogen and temperature on impact response and corresponding microstructure of aluminum (Al) 7075 alloy were investigated under medium strain rate impact loading. The specimens were subjected to impact energy ... -
Development of a Nanoparticle-Embedded Chitosan Sponge for Topical and Local Administration of Chemotherapeutic Agents
(American Society of Mechanical Engineers (ASME), 2014)The following work describes the development of a novel noninvasive transmucosal drug delivery system, the chitosan sponge matrix (CSM). It is composed of cationic chitosan (CS) nanoparticles (NPs) that encapsulate cisplatin ... -
Development of an optical measurement system for surface depth measurements and study of focus effect on determination of steel inclusion content by EN-10247
(SPIE-SOC PHOTO-OPTICAL INSTRUMENTATION ENGINEERS1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98225, 2021)Surface inspections are important in steelmaking processes to characterize the final product's quality. We present a method to measure surface depth profile using laser scattering geometry. This technique is used to analyze ... -
Development of high-performance nanostructured aluminum and its constitutive modeling
(Taylor and Francis Ltd., 2023)A new technique, an in-situ hot-extrusion-based synthesizing process, is proposed to develop high-performance nanocrystalline aluminum (nc-Al) with an optimally tuned strength-to-ductility ratio suitable for various ... -
Development of highly transparent Pd-coated Ag nanowire electrode for display and catalysis applications
(ELSEVIER, 2015)Ag nanowire transparent electrode has excellent transmittance (90%) and sheet resistance (20 Omega/sq), yet there are slight drawbacks such as optical haze and chemical instability against aerial oxidation. Chemical stability ... -
The Digitized Shoulder: From Preoperative Planning to Patient-Specific Guides
(SPRINGER LINK, 2022)As the information and computer technologies improve, it can change how the shoulder surgeries and treatments are done. Digitalization of the shoulder joint acquired via MR and CT (1) shows the surgeons the pathology in a ... -
Edge dislocation depinning from hydrogen atmosphere in α-iron
(Acta Materialia Inc, 2024)Understanding the dislocation motion in hydrogen atmosphere is essential for revealing the hydrogen-related degradation in metallic materials. Atomic simulations were adopted to investigate the interaction between dislocations ... -
Effect of bio-mimicked surface texturing on the shear strength of additively manufactured metal single-lap joints: An innovative approach
(PERGAMON-ELSEVIER SCIENCE LTD, 2025)In this paper, we investigate the mechanical performance of metal single-lap joints featuring bio-mimicking surface textures. The inspiration for the surface textures was the foot and toe of the gecko, a creature whose ... -
Effect of hydrogen on fracture locus of Fe-16Mn-0.6C-2.15Al TWIP steel
(PERGAMON-ELSEVIER SCIENCE LTD, THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, ENGLAND, 2020)Effect of hydrogen on the mechanical response and fracture locus of commercial TWIP steel was investigated comprehensively by tensile testing TWIP steel samples at room temperature and quasi-static regime. 5 different ... -
Effect of pre-rolling temperature on the interfacial properties and formability of steel-steel bilayer sheet in Single Point Incremental Forming
(SAGE PUBLICATIONS LTD1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND, 2021)The aim of this research was to investigate the effect of pre-rolling temperature on the interfacial properties in delamination modes 1 and 2; and formability in Single Point Incremental Forming (SPIF) of Steel-Steel (St-St) ...
