Tür "conferenceObject" Makine Mühendisliği Bölümü Koleksiyonu için listeleme
Toplam kayıt 16, listelenen: 1-16
-
Data-driven discovery and DFT modeling of Fe4H on the atomistic level
(ELSEVIER, 2024)Since their discovery, iron and hydrogen have been two of the most interesting elements in scientific research, with a variety of known and postulated compounds and applications. Of special interest in materials engineering ... -
Development of highly transparent Pd-coated Ag nanowire electrode for display and catalysis applications
(ELSEVIER, 2015)Ag nanowire transparent electrode has excellent transmittance (90%) and sheet resistance (20 Omega/sq), yet there are slight drawbacks such as optical haze and chemical instability against aerial oxidation. Chemical stability ... -
Finding Glenoid Surface on Scapula in 3D Medical Images for Shoulder Joint Implant Operation Planning-3D OCR
(SPIE-INT SOC OPTICAL ENGINEERING1000 20TH ST, PO BOX 10, BELLINGHAM, WA 98227-0010 USA, 2017)Medical imaging has great importance in earlier detection, better treatment and follow-up of diseases. 3D Medical image analysis with CT Scan and MRI images has also been used to aid surgeries by enabling patient specific ... -
Hybrid Power System for Mobile Robotics
(IEEE345 E 47TH ST, NEW YORK, NY 10017 USA, 2016)The power source is a design characteristic for a mobile robot in which the energy source used must provide enough power for a desired period of time depending on the specific task of a robot. Batteries are the most common ... -
The influence of plastic deformation mechanisms on the adhesion behavior and collagen formation in osteoblast cells
(SPRINGER, 2018)In many of biomedical applications, the implant might get in direct contact with the bone tissue where the osteogenesis needs to be stimulated. If osteoblasts can not successfully attach on the implant surface, the bone ... -
Investigation of compressive performance of 3D printed carbon fiber reinforced plastics
(Soc. for the Advancement of Material and Process Engineering, 2018)The compressive performance of Carbon Fiber Reinforced Plastics (CFRP) is an extensive research area of crashworthy structures due to high Specific Energy Absorption (SEA) rates. However, the traditional composite manufacturing ... -
INVESTIGATION OF TEMPERATURE AND PRESSURE EFFECT ON THE HYDROGEN SORPTION KINETICS IN THE INTERFACE OF Mg/MgH2 BY MOLECULAR DYNAMICS
(International Association for Hydrogen Energy, IAHE, 2022)Molecular dynamics simulations were performed in order to analyze the hydrogen sorption kinetics between αMgH2 and hcp Mg structures under different temperatures and pressures. Results showed that hydrogen desorption from ... -
Jet interactions in a feedback- free fluidic oscillator at low flow rate
(American Institute of Aeronautics and Astronautics Inc., 2013)In this work, the internal fluid dynamics and frequency characteristics of feedback-free fluidic oscillators are investigated experimentally for low flow rates below 3.4 mL/s. The internal flow field of feedback-free fluidic ... -
Localization of an autonomous personnel carrying vehicle in indoor environments
(Association for Computing Machinery, 2017)There is an emerging need of intelligent vehicles on indoor environments such as university campuses, airports or shopping malls. These intelligent vehicles can help elderly, disabled, or people with heavy luggage. This ... -
Long-term supplier selection problem: A case study
(SCIENCEPARK SCI, ORGANIZATION & COUNSELING LTD13 SUBAT ST, NO 17, KYRENIA, 99030, CYPRUS, 2017)The problem to select a supplier has taken the best supplier according to all combinations of sorting criteria. With regard to the supplier selection problem, the priority ranking of the criteria taken into consideration ... -
The Numerical Solutions for Stiff Ordinary Differential Equations by Using Interpolated Variational Iteration Method with Comparison to Exact Solutions
(AMER INST PHYSICS, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, 2018)Recently proposed Interpolated Variational Iteration Method (IVIM) is used to find numerical solutions of stiff ordinary differential equations for both linear and nonlinear problems. The examples are given to illustrate ... -
Off-the-Shelf Electronics in Rescue Robotics
(ASSOC COMPUTING MACHINERY, 2015)The design and manufacturing methods of rescue robots with different locomotion principles are explained in the literature in detail. However, the design and realization of electronic circuits of a rescue robot still pose ... -
The relationship of surface roughness and wettability of 316L stainless steel implants with plastic deformation mechanisms
(ELSEVIER SCIENCE BV, PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS, 01.01.2019)The wettability of the implant plays significant role in successful tissue-implant integration and shows strong dependence on the surface topography of the material. Recent studies showed that the plastic deformation ... -
A review of fluidic oscillator development and application for flow control
(2013)This review provides a detailed discussion of the historical development of fluidic oscillators and their application to flow control. Fluidic oscillators were initially developed in the 1960's for a variety of applications, ... -
Thin films of inert metal nanowires for display applications
(TANGER LTD, 2015)Ag nanowire transparent electrode has excellent transmittance (90%) and sheet resistance (20 Ohm/sq), yet there are slight drawbacks such as optical haze and chemical instability against aerial oxidation. Chemical stability ... -
Twist-Bend Instability of a Cantilever Beam Subjected to an End Load via Homotopy Perturbation Method
(AMER INST PHYSICS, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, 2018)In this article, twist-bend buckling analysis of a cantilever beam subjected to a concentrated end load is conducted using Homotopy Perturbation Method (HPM). Even in the linear stability analysis, obtaining an exact ...