Ara
Toplam kayıt 86, listelenen: 51-60
Computational fluid dynamics for the optimization of internal bioprinting parameters and mixing conditions
(WHIOCE PUBL PTE LTD, 2023)
Tissue engineering requires the fabrication of three- dimensional (3D) multimaterial structures in complex geometries mimicking the hierarchical structure of biological tissues. To increase the mechanical and biological ...
Investigation of Friction Coefficient Changes in Recycled Composite Materials under Constant Load
(MDPI, 2023)
The surface quality of machine elements may deteriorate over time while operating under
different conditions. This deterioration adversely affects the wear behavior in the contact areas,
and these materials become unusable ...
An atomistic study on the HELP mechanism of hydrogen embrittlement in pure metal Fe
(PERGAMON-ELSEVIER SCIENCE LTD, 2024)
The Hydrogen Enhanced Localized Plasticity (HELP) mechanism is one of the most important theories explaining Hydrogen Embrittlement in metallic materials. While much research has focused on hydrogen's impact on dislocation ...
A comprehensive experimental and modeling study of the strain rate- and temperature-dependent deformation behavior of bio-degradable Mg-CeO2 nanocomposites
(ELSEVIER, 2024)
A comprehensive study was undertaken on the temperature-dependent and strain rate-sensitive deformation
behavior of near-dense low-volume fraction magnesium-cerium dioxide (Mg-CeO2
) nanocomposites synthesized
by powder ...
Convenient Site Selection of a Floating PV Power Plant in Türkiye by using GIS-Fuzzy Analytical Hierarchy Process
(SPRINGER, 2024)
Floating photovoltaics (FPVs) are appearing as a promising and an alternative renewable energy opinion in which PV panels
are mounted on foating platforms in order to produce electricity from renewable energy on water ...
Investigation of Hydrogen Diffusion Profile of Different Metallic Materials for a Better Understanding of Hydrogen Embrittlement
(Gazi Üniversitesi, 2023)
In this study, hydrogen diffusion profiles of different metallic materials were investigated. To
model hydrogen diffusion, 1D and 2D mass diffusion models were prepared in MATLAB. Iron,
nickel and titanium were selected ...
Strain rate and hydrogen effects on crack growth from a notch in a Fe-high-Mn steel containing 1.1 wt% solute carbon
(Elsevier Ltd, 2020)
Effects of strain rate and hydrogen on crack propagation from a notch were investigated using a Fe-33Mn-1.1C steel by tension tests conducted at a cross head displacement speeds of 10-2 and 10-4 mm/s. Decreasing cross head ...
Predicting the effects of direct-injected fuels co-powered by high-CO2 biogas on RCCI engine emissions using kinetic mechanisms and multi-objective optimization
(ELSEVIER, 2024)
High inert gas content in biogas resulted in poor burning and emissions attributes, though scarcely investigated
in reactivity controlled compression ignition (RCCI). Established kinetic mechanisms were combined with ...
Low-speed bending impact behaviour of adhesively bonded dissimilar single-lap joints
(TAYLOR & FRANCIS LTD2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2021)
This study investigates the low-speed bending impact behaviour of adhesively bonded dissimilar single-lap joints and the effects of both strength and plastic deformation capability of adherend material on adhesive failure. ...
Loading-rate effect on tensile and bending strength of 3D-printed polylactic acid adhesively bonded joints
(TAYLOR & FRANCIS LTD2-4 PARK SQUARE, MILTON PARK, ABINGDON OR14 4RN, OXON, ENGLAND, 2021)
Additive manufacturing provides the production of many machine parts and components with complex geometries. The adhesive bonding technique can be alternative method for joining parts produced with additive manufacturing. ...